Arrow Hobby F4U Corsair PNP with Retracts 1100mm ARR008P

Product Code: ARR008P

Arrow Hobby

Was £239.99 Now £215.99
Quantity: [-] [+]

Entirely practical, with an outstanding performance, this 1100mm span 3S version of the famous carrier fighter is destined only to win hearts.


If there's one thing we guarantee you'll do when you get your hands on the new Arrows Hobby Vought Corsair, it's fly, and fly lots. Authentic, docile and eminently practical, the new 1100mm F4U not only looks the part, its confidence-inspiring flying characteristics and minimal preparation time will have you reaching for it time and time again.


Presented in the colour scheme of the F4U flown by Vance 'Bud' Yount while aboard USS Badoeng Strait during the Korean War this one really is easy on the eye with an abundance of scale detail. Clock the crisply detailed dummy Pratt & Whitney radial, the four-blade Hamilton Standard propeller, slick airbrake-equipped twist 'n' turn retracts, scale pilot figure, working landing and navigation lights, flaps, drop tanks, arrestor hook, detailed tail wheel and panel lines, to mention but a few.


Designed for a standard 3S 2200mAh LiPo and basic 6-channel R/C the F4U's 850KV brushless motor and 40A ESC combo offers a hugely satisfying vertical performance that'll have you grinning from ear to ear as you scribe large warbird loops over the patch. Go on, treat yourself.

Key Features

3536 850KV brushless motor and 40A ESC

High power-to-weight ratio

Suits standard 3S 11.1V 2200mAh 25C LiPo

Oversized battery compartment to suit a multitude of battery sizes and capacities

Seven pre-installed high quality servos


Authentic twist and turn retracts

Highly durable EPO airframe

Easy assembly

Water-based paint

Realistic 4-blade propeller

Removable LiPo battery tray for quick changes

Superb scale detailing

Takes standard 6-channel radio


What's in the Box

1x Factory assembled and painted fuselage with decals applied

1x Factory assembled and painted 1-piece wing with decals applied

1x Factory assembled and painted tail set with decals applied

1x Pre-installed 3536 850KV motor

1x Pre-installed 40A ESC with XT60 connector

1x Set of pre-installed twist and turn electric retracts

1x Scale 4-blade propeller

1x Elevator spar

1x Screw and pushrod set

1x Instruction manual

7x Pre-installed high quality servos


Needed to Complete

6-channel transmitter and receiver combo

3S 2200mAh LiPo

3S compatible LiPo balance charger


Write a review

Note: HTML is not translated!
Bad            Good

Available Options

* Misc: